|
|
Size: 800x800x2100 or
900x900x2100
- Hydro Acupressure Massage / Hydro Back Massage
- Body jets
- Chrome Controls
- Multifunction Hand Shower
- Tempered Glass
- Shelf & Mirror
| Click
to view larger Dimensions |
|
|
 |
 |
£510 |
£409 |
|
| The Maldives 800 X 800 and 900 X
900 shower systems are part of our new range of hydro
massage showers. These delightful units offer you a selection
of massage facilities but without all the technical aspects
found in the luxury steam shower models. These particular
shower units provide you with a complete shower enclosure
but without a roof. Inside you receive a powerful hand
held shower, an array of massage jets that are strategically
placed to massage your body alongside a set of beautifully
finished chrome controls. This is the perfect addition
to any bathroom allowing you the benefits of our massage
and showering cubicle at a fraction of the cost of the
main steam showers. |
Hydro Acupressure Massage / Hydro Back Massage:
This is through an array of strategically positioned multi-jets
or spray nozzles that pinpoint and tenderize channels and subsidiary
channels, along the contours of your body. This then provides
the body with an exquisite massage that can help to increase
your body circulation, invigorate your body cells, prevent disease,
and simply rejuvenate your senses.
Body jets:
These are ten chrome angled jets that are strategically positioned
to massage your back and shoulders. These can be moved to your
own requirements.
Chrome Controls:
These are chrome taps that allow you the control of the mixer
valve and the diverter.
Multifunction Hand Shower:
This allows you to set the spray to various modes.
Tempered Glass:
The glass is a thick tempered glass making it much safer and
durable.
Shelf & Mirror:
Comes equipped with anti-rust rings that prevent stored products
from falling.
Shower Requirements
Water Requirements:
– The steam shower unit requires an equal hot and cold
water supply. We advise that you install a pressure equalising
valve this is to ensure that your cold water and hot water pressure
is balanced. If you do not ensure this is installed it can result
in damaging the thermostat.
It is advisable that all your water pipes are fed at about
1 meter from the floor in the location the cubicle is going
to be installed.
You will also need at between 1.5 - 3 bar of pressure to run
the steam shower. A combination boiler is adequate for providing
this amount of pressure, but if you have a gravity fed system
we advise that you use a water pump equal to 2 bar. We have
a range of water pumps available please ask.
When building the steam shower please ensure that you allow
a minimum of 2.2metres in height.
For further information please go to our FAQ page by clicking
here. Or if you prefer
please feel free to contact any of our advisors.
*Needs extra clearance at top for assembly purposes. Also leave
room to allow access to back for servicing purposes.
|
